Chinese translation for "cooling speed"
|
- 冷却速度
冷却速率
Related Translations:
cool: adj.1.凉，凉爽。2.沉着的，冷静的，慎重的。3.冷淡的，薄情的；不动感情的，冷酷的。4.〔口语〕(价格)不夸大的；实价的；(数额)不打折扣的，整整。5.【打猎】(动物臭迹)淡薄的，些微的，一点点的。6.(颜色)素净的，冷色的〔指以蓝、绿光谱段为基调的〕。7.〔美俚〕极好的，绝妙的，“酷”。8.轻描淡写的，不作充分说明的。9.冷藏着的；有冷藏设施的。10.厚脸皮的，无礼 cooler: n.1.冷却器；冰箱。2.冷却剂；冷饮，清凉饮料。3.〔美俚〕监狱；单人监房；〔军俚〕兵营仓库。短语和例子put in the cooler 〔口语〕搁置起来，撂到一边。
- Example Sentences:
| 1. | The cooling in gradient method was applied , the uneven cooling speed was avoided
通过工艺改进，采用自上而下的梯度式降温方式，避免了降温速度不均匀的问题。 | | 2. | In transient rheological aspect , apparent viscosity increases more evident with the increment of cooling speed
稳态流变情况下，低剪切速率随固相率的增加，其表观粘度增加的速度较高剪切速率时的快。 | | 3. | By changing the tube into d shape ( semicircle ) , the pallet can fully contact with the tubes ( re . picture 2 ) , the cooling speed can be shortened by the contact surface increased
如果把管子的形状改成d形（半圆形） ，托盘在管子上的接触为平面接触（如图2所示） ，接触面积比圆管大大增加，热量以最快的速度从托盘传至排管并由管内的冷剂蒸汽带走。 | | 4. | Choosing the reasonable weld dimension : the defornation will be increased when weld dimension is added ; but if the weld dimension is too small , it will decrease reduce the load ability of weld and quicken the cooling speed of joint
选用合理的焊缝尺寸：增大焊缝尺寸，变形也会变大；但过小的焊缝尺寸，将降低裂纹的承载能力，使接头的冷却速度加快。 | | 5. | The test shows that the cooling speed affects the first arm - spacing and the second arm - spacing , and concluded that they are decreased , the fracture fractographies are improved , and the mechanical properties , especially the toughness , is obviously increased while the cooling speed increases
摘要试验表明，冷却速度增大，使奥氏体的一次二次枝晶间距缩小，断口形貌改善；并且可使材质的综合力学性能，特别是韧性明显提高。 |
- Similar Words：
- "cooling sleeve" Chinese translation, "cooling soap" Chinese translation, "cooling sodium" Chinese translation, "cooling source" Chinese translation, "cooling space" Chinese translation, "cooling spiral" Chinese translation, "cooling spray" Chinese translation, "cooling spray descaling" Chinese translation, "cooling spray system" Chinese translation, "cooling sprayer" Chinese translation
|
|
|
